7 inch HD Digital Wireless Quad-View Monitor - Recording Support, Non-Waterproof (IXU700127QC)

7-Inch HD Digital Wireless Quad-View Monitor with Recording

Monitor multiple camera angles and review recorded footage with this 7-inch HD digital wireless monitor. Designed for compatible vehicle camera systems, it supports four wireless channels, flexible display layouts and built-in recording functionality.

This monitor is suitable for installation inside a protected vehicle cab or other dry location. It is non-waterproof and must be protected from rain, splashes and moisture.

Four Camera Channels on One Display

Connect up to four compatible wireless cameras or transmitters to monitor different areas around your vehicle or equipment. Choose the screen layout that suits your task:

• Quad view: Display four camera feeds simultaneously.
• Split view: View selected camera feeds side by side.
• Single view: Focus on one camera feed.

The monitor accepts 1080P and 720P camera inputs and displays footage on a 1024 × 600 RGB screen with a 16:9 aspect ratio. Camera input resolution is separate from the screen’s display resolution.

Built-In Recording and Playback

The integrated recorder supports four-channel real-time recording and video playback, allowing you to review captured footage on the monitor.

Storage is supported through a Micro SD card with a capacity of up to 128GB. Recording duration depends on card capacity and recording settings. Confirm memory card compatibility and whether a card is included in your selected package before purchasing.

Bright Display with Automatic Adjustment

The 7-inch LCD offers 600 cd/m² brightness and a 700:1 contrast ratio. Automatic brightness adjustment adapts the display to changing lighting conditions.

The screen provides viewing angles of 80° upward, 85° downward and 85° left and right, supporting visibility from different positions inside the operator’s cab.

Digital Wireless Connection and Pairing

The monitor operates within the 2400–2483.5MHz ISM band and supports both manual and automatic pairing with compatible wireless cameras or transmitters.

It uses FHSS modulation and H.264 video coding, with a specified delay of 200ms. Listed transmission distances vary by regional configuration:

• FCC: Up to 300 metres.
• CE: Up to 200 metres.
• MIC: Up to 60 metres.

Actual transmission range depends on obstructions, interference, installation and applicable regional limits. Wireless connectivity carries the video signal; the monitor still requires a power connection.

Trigger Inputs and Automatic Scanning

The monitor includes five trigger line inputs, with adjustable trigger delay and priority. These allow display behaviour to be configured around suitable vehicle signals during installation.

An automatic scan function enables the monitor to cycle through camera channels. Flexible channel settings let you configure the display for your monitoring requirements.

Power-Failure Safeguard

A built-in super-capacitor supports the power-failure safeguard function. This feature is intended to support recording handling when the power supply is interrupted. It does not replace the monitor’s external power supply or provide ongoing battery-powered operation.

Optional Touchscreen Configuration

A touchscreen function is available as an optional configuration. Touch operation should only be expected when the selected product variant specifically includes it.

Technical Specifications

Compatibility and Installation

Install the monitor in a dry, protected location and connect it to a suitable DC 10–32V power supply. Compatible wireless cameras or transmitters are required for viewing and recording.

Four-channel support describes the monitor’s connection capability; it does not indicate that four cameras are included. Check the selected package for camera, memory card and accessory inclusion.