7-Inch HD 2.4GHz Wireless Quad-View Monitor, IP66 Waterproof, No Recording

7-inch HD digital wireless monitor designed for vehicle camera systems on forklifts, trucks, construction equipment and other heavy machinery. It supports up to four compatible wireless cameras or transmitters, allowing operators to view multiple camera angles on one screen. This model provides live monitoring only and does not support video recording or storage.

Four-Channel Monitoring with Flexible Display Modes

The monitor offers quad-view, double-view and single-view modes. Quad view displays four camera feeds simultaneously, while double and single view allow operators to focus on selected channels. Depending on camera placement, these views can help operators check areas around the vehicle, including the rear, sides or working equipment.

The monitor supports 1080P and 720P camera inputs, displayed on a 1024 × 600 RGB screen with a 16:9 aspect ratio. Camera input resolution and the monitor’s display resolution are separate specifications.

Bright 7-Inch Display with Automatic Dimming

The 7-inch LCD features a brightness rating of 1000 cd/m² and a 700:1 contrast ratio. Automatic dimming adjusts the screen brightness in darker environments, helping provide comfortable viewing as lighting conditions change.

The specified viewing angles are 85° upward, downward, left and right, allowing the screen to be viewed from different positions within the operator’s working area.

IP66-Rated Monitor Housing

The  features an IP66-rated housing, providing dust-tight protection and resistance to powerful water jets. This makes it suitable for vehicle-monitoring installations exposed to dust and water within the limits of its protection rating.

A built-in antenna keeps the monitor’s exterior compact. IP66 protection does not cover immersion, and the power connections and installation should be protected as required.

2.4GHz Digital Wireless Connection

Operating within the 2408–2478MHz ISM band, the monitor supports compatible digital wireless cameras and transmitters. Manual and automatic pairing are available for connecting devices during setup.

The system uses FHSS modulation and H.264 video decompression, with a specified delay of 130ms. Listed transmission distances are up to 300m under FCC specifications, 200m under CE specifications and 60m under MIC specifications. Actual range depends on the applicable regional configuration, obstructions, interference, antenna placement and installation conditions.

Wireless connectivity applies to the video signal. The monitor still requires a DC power connection.

Automatic Scanning and Reversing Display Options

The automatic scan function allows the monitor to cycle through camera channels, with an adjustable scanning interval of 5–60 seconds. This provides an alternative to viewing all connected channels simultaneously.

For reversing applications, the monitor supports configurable rear-view parking lines. It also includes five trigger input wires for configuring display behaviour with suitable vehicle signals. Trigger functions and parking lines must be set up according to the vehicle installation.

Power Supply and Operating Conditions

The monitor operates on DC 10–32V, with a maximum power consumption of 10W. It supports PAL and NTSC system formats and includes a 1.5W / 8Ω loudspeaker.

The specified operating temperature range is −20°C to +70°C, with a maximum relative humidity of 90%. Storage conditions are −30°C to +80°C, with a maximum relative humidity of 90%.

Technical Specifications

Compatibility and Installation

The requires compatible wireless cameras or transmitters and a suitable DC 10–32V power supply. Confirm camera compatibility and the supplied package contents before purchasing. Four-channel support describes the monitor’s connection capability and does not indicate that four cameras are included.

Camera views and parking lines are monitoring aids. Operators should continue using direct observation and appropriate operating procedures when driving, reversing or moving machinery.